Ask three body shops to repaint the same ten-year-old sedan and the quotes can come back at numbers like $1,200, $4,500 and $11,000, with all three shops telling the truth. For 2027 planning, an economy respray with masked trim and no door jambs runs about $1,000 to $2,000, a mid-tier base-and-clear job about $3,000 to $6,000, and a full refinish or color change with glass and trim removed $8,000 to $12,000 or more, according to tiers published by refinish-supply retailer Toolsource. Budget chains sit lower still: a same-color Maaco repaint on a daily driver typically lands between $700 and $1,500, per ThePricer’s July 2026 review of customer quotes.
The difference is almost never the paint. It is hours: how many go into sanding, how much trim comes off rather than getting taped over, and whether anyone polishes the clear afterward. The fastest way to see where your money goes is to take one quote apart. Below is a hypothetical mid-tier estimate for a same-color repaint of a midsize sedan, built from posted 2026 shop rates and typical hours, with a verdict on each line. For a quick starting number on your own car, try our car repair cost estimator.
The sample quote: $4,450 to repaint a midsize sedan, same color
Labor is billed at $85 an hour for refinish work and $86 for body work, the national average posted rates for June 2026 in NABR’s LaborRateHero data, as reported by Autobody News. The hours fall inside the ranges technicians cite for a proper full respray, and materials sit inside the $400 to $900 Toolsource estimates for consumables on a full-size sedan. Your shop’s numbers will differ, but the structure will look familiar.
| Line (hypothetical estimate) | Hours | Amount | Verdict |
|---|---|---|---|
| 1. Surface prep: scuff, sand, feather chips | 14 refinish | $1,190 | Fair. Protect this line |
| 2. Minor dent and ding repair | 4 body | $344 | Fair if the dents exist. Ask to see them |
| 3. Remove and reinstall trim, lights, handles | 6 body | $516 | Worth it on a car you will keep |
| 4. Masking | 3 refinish | $255 | Fair, and it should shrink as line 3 grows |
| 5. Spray sealer, base coat and clear coat | 8 refinish | $680 | Fair |
| 6. Paint and materials | n/a | $700 | Fair. Ask for the brand and product line |
| 7. Cut and buff, horizontal panels | 5 refinish | $425 | Optional |
| 8. Door jambs | 4 refinish | $340 | Optional on a same-color job |
| Total | 44 | $4,450 |
Prep and materials alone make up about 43% of the bill. Cut-and-buff and jambs are the $765 you can most safely drop on a same-color job; strip them and the quote falls to $3,685, still a solid mid-tier repaint. The lines below explain which charges earn their keep.
Line 1, prep: the 14 hours that decide whether the paint lasts
Every painter will tell you a finish is only as good as what is under it, and the hours bear that out. Toolsource puts proper prep, masking and multi-coat application on a full respray at 15 to 30 or more hours of labor. That is why sanding is usually the single biggest line, and why it is the first line cheap jobs shrink.

Two conditions blow this line up. Peeling clear coat cannot be painted over; it has to come off, and Maaco’s own package guide says stripping peeling panels to bare metal is priced separately and is required for its warranty to apply fully. Rust is the other. Maaco notes that cracking, old filler and rust need attention before any paint goes on, and ThePricer reports the chain’s warranty on rust repair runs just 90 days. If your car has either problem, a quote that does not mention it is not a cheaper quote. It is an incomplete one.
Verdict: never let a shop trim sanding hours to hit your budget. Cut scope instead, such as skipping the jambs, and keep the prep.
Lines 3 and 4, trim off or taped over: where tape lines come from
Removal and reinstallation, which estimators shorten to R&I, is labor spent taking off door handles, lights, badges and moldings so paint can wrap the panel edges. Masking is the cheaper alternative: tape and paper over the trim and spray around it. Toolsource’s tier guide draws the line plainly. Economy jobs mask around trim and leave visible tape lines, mid-tier jobs remove a moderate amount, and full refinishes pull glass, seals, handles, lights and belt moldings, which alone can take 12 to 25 hours on a small coupe.
On a car you plan to keep for years, six hours of R&I is money well spent, because masked edges are where new paint tends to lift first. On a car you are selling next spring, masking is defensible. The sign of padding is both lines growing at once: if a shop is removing most of the trim, its masking hours should fall, not rise.
Line 6, paint and materials: why this charge climbed in 2026
Materials are the line customers suspect most and understand least. It covers far more than color: sealer or epoxy primer, base coat, clear coat, reducers, hardeners, sandpaper, tape and masking paper. Toolsource notes that a gallon of clearcoat now retails for well over $100, and a quart of quality 2K epoxy primer for $40 to $60 before hardener and reducer.
The prices behind that line rose again this year. Repairer Driven News reported in April 2026 that PPG announced a global increase of up to 20% across its coatings, automotive refinish included, citing raw material, energy and freight costs. That came on top of earlier 2026 increases from PPG, Axalta, BASF and AkzoNobel ranging from 6.8% to 7.6%, and the outlet’s tracking puts the cumulative average increase for the top five U.S. refinish lines at 75.87% since 2020. No supplier had announced a 2027 increase when we checked in November, though PPG said further action was possible, so a materials figure may not hold if you wait months to book.
Verdict: $700 is reasonable for a sedan in base and clear. Ask which paint brand and product line the shop will use and get the materials total in writing. Tri-coat pearls and some metallic reds cost noticeably more to match and spray; Maaco quotes them separately even on its top package.
Labor rates: $85 an hour on a cash job, less when an insurer pays
The sample uses posted rates, the number on the shop’s wall. NABR’s data put the national average posted refinish rate at $85 an hour in June 2026, up 4.9% from a year earlier, and body labor at $86, up 6.2%. Insurers usually pay less. A survey of 473 shops by Collision Advice and CRASH Network, published in October 2026, found the average of insurers’ median non-DRP body rates was $68 an hour.
That gap only matters when a claim is involved. A cosmetic repaint is a cash job, and you pay the posted rate. Rates also swing by metro, so a shop $20 above or below the national figure is not automatically out of line. Compare hours between quotes before you compare rates.
Lines 7 and 8: the optional $765
Cut-and-buff means wet-sanding the cured clear coat and polishing it to remove dust specks and orange peel. Toolsource lists light cut-and-buff on horizontal panels as a mid-tier feature and a full cut-and-buff as a top-tier one, budgeting 8 to 16 hours for the full version on a small car. It improves the look. It does not make the paint last longer.

Door jambs are the other negotiable line on a same-color job, because the original jamb paint still matches. On a color change they stop being optional. Maaco lists the jambs, the underside of the hood and the trunk as add-ons for a color change and charges a color-change fee on top of the package price, and ThePricer notes that jambs are not painted unless they are written into the estimate. Its sample of Maaco color-change quotes runs $2,000 to $4,000 or more.
Where the budget chains fit, and what their warranties reveal
Maaco does not publish national prices; it sends customers to a free estimate it says takes about 15 minutes. It does publish what each of its three packages is, and the warranty attached to each is the best clue to how long the finish is expected to last.
Basic
- Single-stage enamel
- 1-year warranty: 6 months limited, 6 months prorated
- Color matching included
Preferred
- Single-stage urethane
- 3-year warranty: 2 years limited, 1 year prorated
Premium
- Two-stage base coat and clear coat
- 5-year warranty: 3 years limited, 2 years prorated
- Tri-coat and pearl quoted separately
Maaco says its warranties are honored by the specific center that did the work, so moving across the country effectively ends the coverage. ThePricer found promotional exterior repaints from $300 to $700 and standard same-color jobs from $700 to $1,500, with better prep or the Premium package at $1,500 to $2,500 or more. One customer it cited paid about $2,700 once $1,400 of prep was added to a $1,300 paint line, which is the lesson of our sample quote in miniature.
Car paint questions the estimate leaves out
Will car insurance pay for a new paint job?
Only when the paint damage comes from a covered event, such as a collision, vandalism or hail, and then usually just for the affected panels. Fading, peeling clear coat and ordinary wear count as maintenance, so a full cosmetic repaint is normally paid out of pocket. Check your policy or ask your insurer.
How often does a car need to be repainted?
Maaco’s guidance is roughly every five years, but many factory finishes that are washed and protected last much longer. Peeling clear coat or chalky, faded color is the practical signal that a repaint is due.
Is wrapping a car cheaper than painting it?
Not by much. A quality full wrap on a sedan commonly runs about $2,500 to $5,000, close to a mid-tier repaint, and removing it later can cost $500 to $1,500. A wrap protects the original paint and is reversible; paint is permanent and never needs removing.
Can I paint my car myself to save money?
Materials for a basecoat and clearcoat job on a midsize car run roughly $300 to $800 or more at retail, according to Toolsource, before spray equipment, a ventilated space and protective gear. Two-part automotive paints contain isocyanates that require proper respiratory protection, so DIY makes most sense on an older car or a single panel.
How long will a cheap paint job last?
A 2026 guide from Relux Collision estimates one to three years for a basic job, five to ten for mid-range work and ten or more for a high-end finish. Maaco’s warranties, from one year on its Basic package to five on Premium, point the same way.
Four moves that turn three quotes into a fair comparison
- Ask for line items, not a lump sum. Every shop should show hours per line and name the paint brand and product line.
- Compare prep hours first. A quote with half the sanding of the others is cheaper because it does less.
- Fix the scope before you shop. Decide on jambs, cut-and-buff and trim removal, then have each shop price that same list.
- Get the warranty in writing. Note what voids it and whether rust repair is covered, and inspect the car in daylight before the final payment.
More ways to price a car’s upkeep
- Car ownership costs in 2027: the complete guide
- Car wrap cost by vehicle size, film and finish
- Alternator replacement cost
- Brake pad and rotor replacement cost
- Wheel alignment cost
- Car repair cost estimator
Pricing method: prices were researched in November 2026 for 2027 planning and may change. The sample quote is hypothetical. Labor rates come from NABR LaborRateHero data and the Collision Advice and CRASH Network survey as reported by Autobody News; tier ranges from Toolsource; Maaco package terms from Maaco; Maaco price ranges from ThePricer; supplier increases from Repairer Driven News. Get itemized quotes from local shops before you commit. See our disclaimer.
















