The usual mistake with a kitchen island is pricing the furniture and forgetting the utilities. Shoppers add up cabinets and a slab of quartz, then the contractor’s quote arrives at nearly twice that, because the expensive part of an island is often what runs into it. Angi puts the national average at about $4,800, Thumbtack’s typical range runs from $897 to $8,360, and a custom island with water, power and appliances can pass $10,000.
Short answer for 2027 planning: a rolling cart or ready-made island costs $200 to $3,000. Base cabinets with a countertop run $400 to $4,000. Add a sink and dishwasher and the range moves to $3,000 to $5,000, and a custom island with electricity, water and appliances starts around $6,000 and climbs past $10,000 (Thumbtack, October 2026).
Averages hide where the money goes, so we took one island apart instead. Below is a hypothetical contractor quote for a common request, an 8-foot island with a prep sink, two outlets and three pendant lights, built entirely from published price ranges. It is an example, not a real invoice, but every line on it is one you will see on yours.
The sample quote: an 8-foot island with a prep sink
| Line item | How we priced it | Example amount |
|---|---|---|
| Base cabinets, 8 linear feet, installed | $300 per linear foot, top of Thumbtack’s $100 to $300 stock range | $2,400 |
| Quartz countertop, 8 ft by 42 in (28 sq ft) | $60 per sq ft, inside Thumbtack’s $15 to $70 for engineered quartz | $1,680 |
| Prep sink and faucet | $400 sink, $200 faucet (Angi: $400 to $1,500 and $125 to $300) | $600 |
| Plumbing: supply, drain and vent to the island | Angi’s $500 to $1,900 for plumbing pipes | $1,200 |
| Electrical: circuit run and two GFCI receptacles | About 25 ft of wiring at $10 per foot plus two outlets at $200 each | $650 |
| Three pendant lights, installed | $200 each (Angi: $100 to $300 per light) | $600 |
| Flooring patch where the island lands | Thumbtack: $200 to $500 | $350 |
| Permit | Thumbtack: $75 to $250; Angi reports up to $2,900 for bigger scopes | $250 |
| General contractor markup | 15% of $7,730 (Angi: 10% to 20%) | $1,160 |
| Total | $8,890 |
That total lines up with what designers report. NerdWallet’s April 2026 report quotes a designer who prices a 4-foot island with custom cabinets and a granite top, no sink or appliances, at around $3,500, and an 8-foot island with a sink at about $9,500. The cabinets and the stone together are $4,080 of our $8,890, less than half. Everything else is utilities, finish work and overhead.
Cabinets and stone: the lines you can trim without regret
Cabinet pricing spans a wide band. Thumbtack puts stock cabinets at $100 to $300 per linear foot installed and custom work at $500 to $1,200, so the same 8 feet costs $800 at the bottom and $9,600 at the top. All four sides of an island show, so ask whether finished end and back panels are priced in; trim adds about $10 per linear foot.
The countertop is the other big lever, and material choice swings it more than size does. Thumbtack’s per-square-foot ranges for 28 square feet of top:
| Material | Per sq ft | 28 sq ft island top |
|---|---|---|
| Laminate | $8 to $27 | $224 to $756 |
| Butcher block | $10 to $40 | $280 to $1,120 |
| Engineered quartz | $15 to $70 | $420 to $1,960 |
| Granite | $15 to $140 | $420 to $3,920 |
| Soapstone | $70 to $120 | $1,960 to $3,360 |
| Marble | $25 to $190 | $700 to $5,320 |
Thumbtack notes that high-end stone can account for as much as 75% of an island’s price. Butcher block is the quiet bargain for a prep or seating island.
Both of these lines face new import duties next year. Imported kitchen cabinets and vanities have carried a 25% Section 232 tariff since October 14, 2025, and a December 2025 proclamation pushed the scheduled increase to 50% to January 1, 2027. Lower caps apply to some trading partners: the UK at 10%, and the EU and Japan at 15% including normal duties, per trade advisories from CargoTrans and TC Wholesale Cabinetry. Separately, a Section 201 safeguard on quartz slabs took effect August 15, 2026, adding 25% to imports within a quota and 50% above it, stepping down slowly over four years. Canada, Mexico, South Korea and a long list of other countries are exempt. Duties apply to the import value, not your retail price, so pass-through varies by brand; domestic cabinet lines are not covered.
The sink line is really a drain-and-vent line
A $400 prep sink looks modest on a showroom tag. Getting water to and from the middle of a room is the expensive part. The plumber has to run supply lines and a drain under the floor, and an island sink has no wall behind it for an ordinary vent stack, so the venting needs one of the island-specific methods your local code allows. On a slab foundation that can mean cutting concrete, which is why two neighbors can get very different plumbing quotes for identical islands.
With the prep sink
Cabinets, quartz, electrical, lights, floor patch and permit, plus $600 for sink and faucet and $1,200 for plumbing. With 15% markup: $8,890.
Without it
The same island minus those two lines: $5,930 before markup, about $6,820 after. The sink, in other words, costs roughly $2,070 once it is plumbed and marked up.
If the main sink already sits 6 feet away on the perimeter, the second one is a convenience you are paying about $2,000 for. In a large kitchen with two cooks, it can earn its keep. Add a dishwasher and Angi lists $700 to $2,000 more for the machine, plus installation; our dishwasher installation cost guide covers that line in detail.
Outlets, pendants and the 2023 electrical code
Electrical is the line most likely to change between the first quote and the final one, because island outlet rules depend on which edition of the National Electrical Code your town enforces. Under older editions, an island of a certain size needed at least one receptacle, and electricians often mounted it on the island’s side panel. A March 2026 article published by the National Association of Home Builders explains that in places that adopted the 2023 NEC without amendments, side-mounted outlets can no longer be used to meet the countertop outlet rules, a change aimed partly at keeping cords away from children. That pushes builders toward pop-up or in-countertop receptacles, which cost more than a standard GFCI box.
The practical step is one phone call: ask your electrician or the local building department which code edition applies before the countertop is templated, because a pop-up outlet needs a hole cut in the stone. Angi prices GFCI outlets at $150 to $400 and wiring at $7 to $12 per linear foot; pendant lights add $100 to $300 each.
Permits, floor patches and markup: fair charges vs padding
- Permit ($75 to $250, sometimes far more). Fair, and a quote that leaves it off when plumbing or wiring is involved is a warning sign, not a discount. NerdWallet notes that stationary islands or those over a certain size typically need one; a movable piece of furniture does not.
- Floor patch ($200 to $500). Fair when an old island comes out or the floor has to be opened for plumbing. If the new island simply sits on an intact floor, ask what the line is for. If you are replacing floors anyway, settle the island layout first; see our vinyl plank installation cost breakdown.
- Demolition ($400 and up) and haul-away ($130 to $500). Fair when an old island or peninsula comes out. Padding when nothing is being removed.
- Contractor markup (10% to 20%). Fair for coordinating a plumber, an electrician and a fabricator. A markup on top of separately invoiced subcontractor overhead is double-dipping; ask how it is calculated.
Islands that skip most of this invoice
Not every kitchen needs a plumbed, wired island. If the goal is prep space and a place to perch, the cheaper formats avoid permits and trades entirely. Thumbtack’s October 2026 ranges by type:
| Island type | Typical price | Trades involved |
|---|---|---|
| Kitchen cart | $200 to $3,000 | None |
| Kitchen table used as an island | $200 to $4,000 | None |
| Base cabinets with countertop | $400 to $4,000 | Installer, fabricator |
| Cabinets, countertop, sink and dishwasher | $3,000 to $5,000 | Plus plumber, electrician |
| Custom high-end with power, water and appliances | $6,000 to $10,000+ | All of the above, often a designer |
Angi puts prefab stationary islands at $900 to $5,000 and says a confident DIYer can assemble one for $100 to $2,000 in parts. NerdWallet suggests building in stages, cabinets and a top now and a sink later only if you miss one, or repurposing an old sideboard.
Check the clearances before anyone quotes
The costliest island is one that does not fit and gets cut down after the stone is installed. The National Kitchen and Bath Association’s planning guidelines, which are recommendations rather than code, give the numbers to tape out on your floor:
- Work aisle: at least 42 inches for one cook, 48 inches for two or more.
- Walkway: at least 36 inches.
- Behind seated diners: 32 inches if nobody passes, 36 inches to edge past, 44 inches to walk past.
- Each seat at a 36-inch counter: 24 inches wide with 15 inches of knee space. At a 42-inch bar height, 12 inches of knee space; at 30-inch table height, 18 inches.
- Cooktop in the island: at least 9 inches of counter behind it when the surfaces are level.
Three counter stools need 72 inches of seating length at 24 inches each. On an 8-foot island, that leaves only 24 inches to spare along the seating side.
Arithmetic from NKBA Kitchen Planning Guidelines
Kitchen island questions from the planning stage
How much does a rolling kitchen island cost?
A rolling cart is the cheapest kitchen island price you will find. Angi lists rolling carts at $100 to $900, and Thumbtack puts kitchen carts at $200 to $3,000 depending on size, materials and whether the top is solid wood or stone. Because they are movable furniture, carts need no permit or installation.
Does a kitchen island add value to a home?
It can recover part of its cost. Angi estimates a return of about 60% to 80% on a kitchen island. Buyers tend to value prep space and seating, but a premium custom island in a modest house is unlikely to pay for itself at sale.
Can I install a prefab kitchen island myself?
Usually, if it involves no plumbing or wiring. Angi puts DIY prefab islands at $100 to $2,000 in materials and says doing the work yourself saves about $40 to $140 per hour in labor. Anything that adds a sink, an outlet or a gas line should go to licensed trades, and often needs a permit.
How much more does an island with a cooktop cost?
Expect a cooking appliance, venting and a fuel or power supply. Thumbtack lists gas stoves at $500 to $3,250 installed and island range hoods at $550 to $3,600 installed, and Angi puts gas line work at $260 to $820. NKBA guidelines also call for at least 9 inches of counter behind an island cooktop, which can lengthen or widen the top.
What does a kitchen designer charge just for an island?
Rates vary. Bob Vila cites about $65 to $250 an hour for kitchen designers, while full-kitchen design fees run into the thousands. For a single island, many cabinet suppliers and big-box stores will draw a layout at little or no cost when you buy their cabinets.
Seven things to check on your own island quote
- Cabinets are priced per linear foot, with finished end and back panels included.
- Countertop square footage includes the overhang, and the material is named.
- Plumbing names the vent method and says whether concrete cutting is included.
- The electrician has confirmed which NEC edition applies and where the outlets go.
- A permit line appears whenever water, power or gas is involved.
- The markup percentage is stated once, not buried in each subcontractor line.
- For imported cabinets or quartz, the quote says whether it is price-locked if the order ships after January 1, 2027.
Get at least two quotes, and compare them line against line rather than total against total. The differences will tell you more than the averages.
Other kitchen projects, priced
- Home improvement costs in 2027: the complete price guide
- What a full kitchen remodel costs, dollar by dollar
- Dishwasher installation cost and what the opening changes
- Garbage disposal installation, swap vs first install
- Microwave prices for four kinds of kitchens
- Vinyl plank flooring installation cost
More related guides: Interior designer cost: hourly vs flat fee · 7 ways buyers overpay for quartz countertops
Pricing method: prices were researched in November 2026 for 2027 planning and may change. Ranges come from Thumbtack (updated October 2026), NerdWallet (April 2026), Angi, Bob Vila and NKBA planning guidelines; tariff details come from presidential proclamations as summarized by STR, CargoTrans, TC Wholesale Cabinetry and C.H. Robinson. The sample quote is hypothetical. Local codes, materials and labor rates vary, so get written quotes from licensed contractors. See our disclaimer.
















