Is the door finished, or does it just need new wheels? That is the question behind most searches for a new patio door, and the answer changes the bill by a factor of ten. A full patio door replacement averaged $2,275 in LawnStarter‘s 2026 data, with most homeowners paying $1,265 to $3,165; Angi’s average across 1,827 verified projects came in higher, at $2,555. A roller job on the same door typically runs $75 to $200.
So start with the symptom, not the showroom. Find what your door is doing in the table below, read the matching section, and you will know whether to book a repair, a glass shop or an installer. All figures are current 2026 prices, which are the best planning numbers for 2027.
Match the symptom to the likely bill
| What the door is doing | Usual cause | Typical fix | Typical price |
|---|---|---|---|
| Drags, grinds or hops off the track | Worn rollers or a dented track | New rollers, track repair | $75 to $200 (rollers); $100 to $350 (track) |
| Milky haze between the panes | Failed insulated-glass seal | New glass unit | $200 to $600; low-E up to $800 |
| Cracked or shattered glass | Impact or stress | New tempered glass unit | $200 to $600 |
| Lock won’t catch | Worn latch or a door out of line | Lock or handle swap, realignment | $50 to $200; alignment $75 to $175 |
| Drafts, whistling, rattles | Flattened weatherstripping | New weatherstripping | $50 to $125 |
| Soft sill, water on the floor | Rot or failed flashing | Frame repair or full replacement | $150 to $400 repair; $1,265 to $3,165 replacement |
| Nothing broken, you want more light | An upgrade, not a repair | New door or wider opening | $2,275 average; a new opening adds $1,000 to $3,600 |
It drags, grinds or jumps the track
This is the most common complaint and the most over-diagnosed one. A slider that suddenly takes two hands to open usually has rollers with flat spots or broken bearings, sometimes packed with grit from the track. HomeWyse prices a basic sliding door repair (lift the panel out, clean the track, fit two new roller assemblies, realign) at $134 to $160 per door in labor as of January 2026, and it notes that a general contractor will add a 13% to 22% markup if one manages the job. Angi puts roller replacement at $75 to $200 all in.
Track damage costs more, $100 to $350, because a dented aluminum rail cannot be adjusted back into shape. Even so, you are rarely past a few hundred dollars. If you are handy and the panel is light enough for two people to lift, the parts run $20 to $100. The hard part is matching the roller to your door’s brand and age, so photograph the old one and its stamped part number before ordering.
One caution: a door that drags only at one end, or drags worse in summer, may not be a roller problem at all. That pattern can point to a sagging header or a settling floor, which a new door will not cure. If new rollers fail to fix the drag, have someone check the opening for level before you spend more.
Fog between the panes, or a crack you can’t ignore
Haze you cannot wipe off means the seal on the insulated glass unit has failed and moist air has gotten between the panes. The glass is still safe, and the door still works. You are losing some insulating value and most of the view. Angi lists sliding door glass replacement at $200 to $600, and $300 to $800 for low-E glass. A crack is priced the same way, with one difference: it is a safety issue, so do not wait on it.
Building codes require safety glazing in doors, which in practice means tempered glass, so a hardware-store pane is not an option. LawnStarter’s materials-only figures show what the glass itself costs: $465 to $700 for a tempered unit, $215 to $465 for low-E, and $775 to $1,875 for hurricane-rated glass in coastal zones.
This is where the repair-or-replace math gets close. Take a hypothetical two-panel slider with fog in both panes and tired rollers. Two glass units at about $400 each plus a $150 roller job comes to roughly $950. LawnStarter’s installed range for a whole new two-panel door starts at $585 and runs to $2,885. If your old door is builder-grade aluminum with single-pane or early double-pane glass, putting $950 into it buys you a clearer view of a door that still leaks heat. If it is a good wood or fiberglass unit with a sound frame, new glass is the better buy.
It won’t latch, or the wind gets in anyway
These are the cheapest fixes on the list. A new mortise lock or handle set runs $50 to $200 installed, and an alignment, which is often the actual reason a lock stops catching, costs $75 to $175. Fresh weatherstripping is $50 to $125. Rattles and whistling on a windy day almost always trace back to weatherstripping that has flattened or torn.
A two-minute draft test you can do tonight
Close the door on a dollar bill at several points along the latch side and the bottom. If the bill slides out with no resistance, the weatherstripping there is no longer sealing. Do the same at the meeting rail where the two panels overlap. Mark the weak spots with painter’s tape so a repair tech can see them, or so you can order the right profile yourself.
If the lock still will not engage after the door is realigned and the latch replaced, look at the frame. A jamb that has pulled out of square is a structural symptom, and it moves you into the next section.
A soft sill or water on the floor means the door’s time is up
Press a screwdriver into the sill and the bottom of the side jambs. If wood gives like cork, or if you find stains on the subfloor below the door, the problem is water getting past the frame. Angi prices frame repair at $150 to $400, which works for a small, dry patch of rot. It does not work when the sill pan or flashing has failed, because the water will keep coming. In that case the old door has to come out anyway, and paying for both a frame repair and a later replacement is the most common way homeowners overspend on patio doors.
Ask any installer you hire to quote the subfloor separately. Rot discovered after the old door comes out is a change order, and you want that price agreed in writing before demolition. Removal and disposal of the old door usually runs $100 to $300 and is normally included in a replacement quote; confirm it is.
If the door is coming out regardless, this is also the moment to decide whether the same size is still the right size. Widening the opening is far cheaper now than later, though Angi notes that cutting a new opening in a bare wall adds $1,000 to $3,600, and changing a bearing wall needs an engineer and a permit.

Pricing the replacement: frame, panels and style
Once replacement is the answer, three choices drive the quote: what the frame is made of, how many panels it has, and whether it slides, swings or folds. The installed ranges below come from LawnStarter’s 2026 data, which includes labor.
| Choice | Installed price range | Worth knowing |
|---|---|---|
| Vinyl frame | $720 to $1,900 | Cheapest and low-maintenance; dark colors can warp in hot sun |
| Aluminum frame | $1,020 to $2,130 | Slim, strong frames; conducts heat unless thermally broken |
| Fiberglass frame | $1,450 to $3,165 | Stable in heat and cold; paintable |
| Wood frame | $1,585 to $3,300 | Best looking inside; needs refinishing outside unless clad |
| Two-panel slider | $585 to $2,885 | The standard 6-foot opening |
| Three-panel slider | $1,015 to $4,515 | Common in 9-foot openings |
| Four-panel slider | $2,315 to $6,285 | Often a 12-foot opening with two moving panels |
| French (hinged) doors | $435 to $4,000 | Swing room needed inside or out |
| Bi-fold or folding wall | $3,000 to $10,000 | Opens nearly the full width |
Sliders win on cost per foot of glass and on space, since nothing swings into the room. French doors give a wider clear opening when both leaves are open and suit traditional houses, but every square foot they swing through is a square foot you cannot put a table on. Swapping a slider for French doors in the same opening is usually a like-for-like rough opening, though the installer may need to adjust framing. HomeGuide puts structural changes at $2,000 to $4,000 or more when they are needed.

Andersen, Pella, Milgard: what the nameplate adds
Brand matters less than series. Angi’s 2026 brand ranges overlap heavily: American Craftsman $400 to $2,500, Pella $400 to $5,200, Andersen $1,000 to $5,200, Jeld-Wen $800 to $4,600 and Milgard $1,000 to $5,800. Inside a single brand, HomeGuide’s installed figures for Andersen show how quickly the ladder climbs:
- 100 Series (gliding only): $2,000 to $5,000 or more installed
- 200 Series: $3,000 to $9,000 or more
- 400 Series: $4,000 to $10,000 or more
- A-Series: $5,000 to $15,000 or more
- E-Series: $6,000 to $20,000 or more
- Renewal by Andersen sliding door: $4,000 to $8,000 installed
Labor is the steadier number. Angi pegs installer rates at $70 to $100 an hour, or about $300 to $800 for a straightforward swap, and HomeGuide puts basic installation including removal at $500 to $1,500. A new sliding screen adds $125 to $285, and a keyed or multipoint lock upgrade $35 to $265. Location moves totals too: Angi reports many states under $2,000 on average, while Montana and Oregon run up to $6,000.
One change for 2027 buyers: the federal energy credit that used to soften the bill is gone. The Section 25C credit paid 30% of the cost of a qualifying Energy Star exterior door, up to $250 per door and $500 a year, but the 2025 budget law ended it for doors placed in service after December 31, 2025. No replacement federal credit has been announced, so check your utility and DSIRE for local rebates instead. We found no announced 2027 price increases from the major door makers as of mid-November 2026.
Patio door questions the table doesn’t answer
What is the cheapest way to get a new patio door?
A vinyl two-panel slider in an existing opening. LawnStarter’s 2026 data puts vinyl doors at $720 to $1,900 installed, and a DIY sliding door install can come in around $300 in materials if you are comfortable setting and flashing a heavy unit yourself.
How much is patio door installation cost on its own?
Labor typically runs $300 to $800 for a straightforward same-size swap at $70 to $100 an hour, according to Angi, and HomeGuide puts basic installation including removal at $500 to $1,500. Structural work such as widening the opening is extra.
How much does a hurricane-rated patio door cost?
Angi lists hurricane-proof sliding doors at $2,000 to $3,000. The impact glass alone runs $775 to $1,875 per LawnStarter, and coastal building codes may require it on a replacement.
Do I need a permit to replace a patio door?
It depends on your city or county. A same-size swap often needs no permit or only a simple one, while enlarging an opening or altering a bearing wall almost always does. Call your local building department before work starts, and ask your installer who pulls it.
Can I put a sliding door where a window is now?
Yes, but it is new construction rather than a replacement: the wall below the window has to be removed, a header may need resizing and the floor finished at the threshold. Angi estimates a new opening adds $1,000 to $3,600 on top of the door.
Who to call, depending on what you found
- Dragging, sticking, bad lock or drafts: a sliding door repair company or an experienced handyman. Expect a visit in the $75 to $350 range, and ask them to check the opening for level while they are there.
- Fogged or cracked glass: a glass shop. Get the price for tempered replacement units in writing, then compare it with the cost of a new door before you approve.
- Rot, water damage or a bigger opening: a door or window installer, ideally two or three of them. Ask each to price removal, the door, subfloor repair and any permit as separate lines so the quotes compare cleanly.
More prices for the space outside that door
- Home improvement costs in 2027: the complete price guide
- What it costs to build a wood or composite deck
- Concrete patio cost, from broom finish to stamped
- Pergola installation cost
- Garage door repair cost by problem
- Plantation shutters cost, vinyl to hardwood
Pricing method: prices were researched in November 2026 for 2027 planning and may change. Figures come from LawnStarter and Angi 2026 cost data, HomeWyse (January 2026), HomeGuide’s Andersen price guide and This Old House (updated November 2026). Quotes vary by region, door size and site conditions. See our disclaimer.
















