$62.61. That is what AppliancePartsPros was charging in November 2026 for the drain pump that fits a long list of Whirlpool-built dishwashers, the part behind a large share of “it won’t drain” calls. Most dishwasher repairs still cost $150 to $300 once a technician has come, diagnosed and fixed the machine: Sears Home Services puts its typical dishwasher repair at $150 to $220, and Thumbtack’s job data averages about $220. The gap between a $63 part and a $300 bill is the subject of this article.
We built one hypothetical invoice for a common job, a failed drain pump, and took it apart charge by charge. Some lines are fair. One or two are often padding. And at a certain total, the right move is to stop reading the invoice and shop for a new machine.
A $504 drain pump invoice that should have been $205
This invoice is an example we assembled from published price ranges, not a real customer’s bill. It reflects the way many repair visits get written up: a trip fee, an hour of labor, the failed part, two related parts, and a second visit because the pump was not on the truck.
| Line item (hypothetical) | Charged | Yardstick from our research | Verdict |
|---|---|---|---|
| 1. Service call and diagnosis | $129 | $70 to $150; Sears waives its fee if you approve the repair | Fair only if credited toward the job |
| 2. Labor, one hour | $95 | $50 to $125 an hour (HomeGuide); $75 average (Thumbtack) | Fair |
| 3. Drain pump | $110 | $62.61 retail for a common Whirlpool pump | Normal markup; worth a question |
| 4. Check valve and drain hose | $95 | $54.25 and $25.76 retail | Padding unless the old parts failed |
| 5. Return trip | $75 | No industry standard | Ask before you approve |
| Total | $504 | Installed drain pump: $100 to $400 (HomeGuide) | $205 with lines 1, 4 and 5 removed |
Strip out a service fee that should have been credited, two add-on parts nobody proved were broken, and a second trip the shop caused, and the bill drops to $205. That figure sits comfortably inside HomeGuide’s $100 to $400 range for an installed drain pump, which is the point: the honest version of this repair is not expensive.
Charge 1: the trip fee you owe even if nothing gets fixed
Every visit opens with a diagnostic or service-call fee. Sears Home Services says its fee typically runs $90 to $150 for most appliances, is charged on the day of service, and is waived if you go ahead with the recommended repair. HomeGuide puts the minimum visit charge at $70 to $130 and says it usually covers the first hour. SlashGear, citing Angi, lists $65 to $125. Thumbtack sees minimums as low as $40 to $60, with some companies over $100.
What matters is less the number than the policy. A fee that rolls into the repair is a fair charge for a trained person’s time and fuel. A fee that sits on top of a separate first-hour labor charge means you are paying twice for the same hour. Ask on the phone, before anyone drives over, whether the fee is credited toward the repair and whether it includes any labor.
Charge 2: an hour of labor, and why it rarely runs longer
Dishwashers are among the more forgiving appliances to work on. The drain pump, inlet valve, float switch and heating element all sit low in the machine, reached by pulling the kick plate or sliding the unit a few inches out of its opening. A competent technician with the right part replaces most of them in under an hour.
Rates vary more by market than by brand. HomeGuide lists $50 to $125 an hour. Thumbtack’s national average is $75, with a $40 low and a $110 high. HomeAdvisor’s older figure of $100 to $200 an hour dates from a 2022 page and likely reflects pricier metro markets. If your invoice shows two or three hours for a pump or valve swap, ask what took the extra time. Sometimes the answer is legitimate, like a seized mounting bracket or a unit that had to come fully out from under a granite counter. Often it is not.

Charge 3: the part, priced against what you could buy it for
Shops mark up parts. That is normal: they source the part, stock it on the truck and stand behind the installation. But the retail price gives you a yardstick. Here is how HomeGuide’s installed prices compare with the part-only prices it cites for the most common dishwasher repairs.
| Repair | Part alone | Installed by a pro | Usual symptom |
|---|---|---|---|
| Water inlet valve | $10 to $40 | $80 to $170 | Won’t fill, or fills slowly |
| Float switch | Not listed | $90 to $190 | Won’t fill, or overfills |
| Door spring and latch | Not listed | $90 to $160 | Door drops open or won’t latch, so no cycle starts |
| Door gasket | Not listed | $80 to $200 | Leaking at the front |
| Drain pump | $20 to $100 | $100 to $400 | Standing water after a cycle |
| Heating element | $25 to $75 | $200 to $350 | Dishes come out wet or cold |
| Wash motor | $130 to $300 | $350 to $500 | Hums but doesn’t spray |
| Control board | Not listed | $200 to $600 | Dead panel, error codes, random behavior |
| Tub | Not listed | $270 to $650 | Cracked or rusted-through tub |
Two rows deserve extra scrutiny. Control boards are the priciest common repair, and technicians on repair forums admit they are hard to diagnose in the field, which is why some boards get replaced when the actual fault was a door switch or a wiring harness. HomeAdvisor notes that a control panel problem can cost as little as $50 if it only needs resetting. And a tub replacement on most machines costs close to what a budget dishwasher does, so treat that quote as a replacement signal rather than a repair.
Charge 4: the “while I’m in there” parts
The parts a tech adds alongside the main repair are where invoices most often swell. On AppliancePartsPros, the Whirlpool pump’s “frequently bought together” suggestions are a $54.25 check valve and a $25.76 drain hose. Both can fail, and both can be sensible to replace while the machine is open. Neither is automatically necessary.
Owners who post on r/Appliances describe a familiar pattern: parts swapped first and diagnosed later, a $120 visit followed by a $500 control board quote when a new dishwasher cost about $100 more, and a pump replaced only on a second visit after cheaper fixes failed. Technicians in the same threads push back that parts prices have roughly doubled since the pandemic and that warranty work pays poorly, which helps explain the pressure to sell more on cash calls. Both things can be true. Your job is to make each added part earn its place.
Four questions that keep add-on parts honest
- What test showed this part failed, and can you show me?
- Is this replacement required for the main repair to work, or recommended?
- What do you charge for the part, separate from labor?
- Can I keep the old parts? (A shop that refuses this simple request is telling you something.)
Charge 5: the second visit, and who should pay for it
Trucks cannot carry every part for every model, so a two-visit repair is common: diagnose on day one, order the part, install it later. That is reasonable. Paying a second trip charge for it usually is not, because the return visit exists to finish work you already approved. There is no published industry standard here, so the rule is simple: before you approve the repair, ask whether a return trip carries any fee, and get the answer on the written estimate.
The same goes for a repair that does not hold. If the new pump fails to fix the drainage and the shop comes back to try something else, you should not be paying a fresh service call for the shop’s misdiagnosis. Ask how long the company warrants its parts and labor before the first visit ends.
The invoice total that says buy a new dishwasher
Most guides use a 50% rule. Sears Home Services says to replace when the repair would cost 50% or more of a new dishwasher, and to lean toward replacing a machine older than seven years that faces a major repair. Its example: if a new unit costs $800 with installation and haul-away, a repair estimate of $400 or more points to replacement. Sears gives a lifespan of 10 to 15 years; HomeGuide says 8 to 15.

The bar for “new” is lower than many owners assume. Chowhound’s July 2026 roundup found built-in 24-inch models at $443 for an Amana (ADFS2524RS) and $469 for a Frigidaire (FFCD2413US) at Home Depot, and $479 for a Midea at Lowe’s. Add $150 to $300 for installation by SlashGear’s count, or $200 to $500 by HomeGuide’s, and a basic swap lands around $600 to $950. Half of that is roughly $300 to $475, which means a $500 control board quote on an eight-year-old builder-grade machine is an easy call. A $205 pump on a four-year-old one is just as easy in the other direction.
One factor will keep new-unit prices in view next year. Since June 23, 2025, imported dishwashers have carried a 50% Section 232 tariff on the value of their steel content, under the federal expansion of steel derivative tariffs to household appliances. We found no announced 2027 dishwasher price list from a major brand as of November 2026, so check current prices before you decide rather than assuming a sale will come.
| Machine age | Minor repair (valve, latch, gasket: $80 to $200) | Mid repair (pump, heating element: $100 to $400) | Major repair (motor, board: $200 to $600) |
|---|---|---|---|
| Under 5 years | Repair; check the manufacturer warranty first | Repair | Repair, after a warranty check |
| 5 to 8 years | Repair | Repair if under half the cost of new | Get a replacement quote before deciding |
| Over 8 years | Repair if the tub and racks are sound | Toss-up; lean replace on budget models | Replace |
What a fair dishwasher repair bill looks like
A fair bill for a typical dishwasher repair has three lines that matter, a credited visit fee, about an hour of labor and one part, and lands between $150 and $300. Anything above that should come with a reason you can see: a failed part held in your hand, a test result, or a repair the table above prices higher. When the quote creeps past half the price of a $450 to $500 machine plus installation, take the visit fee as the cost of learning that your dishwasher is done, and spend the rest on a new one.
More questions owners ask about dishwasher repair
Can I replace a dishwasher drain pump myself?
Many owners can. The pump for many Whirlpool-built models sold for $62.61 at AppliancePartsPros in November 2026, and HomeGuide puts most drain pumps at $20 to $100 as a part. Shut off the power at the breaker and the water supply first, and confirm the part number for your exact model before ordering.
How much does it cost to fix a leaking dishwasher?
It depends on the source. HomeGuide lists a new door gasket at $80 to $200 installed and a drain hose at $80 to $180, while a cracked tub runs $270 to $650. A leak under the machine can also come from a loose supply line, so have the source confirmed before paying for parts.
Can a dishwasher control board problem be fixed with a reset?
Sometimes. HomeAdvisor notes that a control panel issue can cost as little as $50 if it only needs resetting, against $200 to $600 for a replacement board per HomeGuide. Cutting power at the breaker for a few minutes is a free first step; check your owner’s manual for a model-specific reset.
Do Energy Star dishwashers save enough to justify replacing an old one?
Not on their own in most homes. Sears says Energy Star models use about 30% less water and 12% less energy than non-certified ones, which helps, but the savings rarely pay for a new machine by themselves. They tip the scale when the old unit already needs a major repair.
Other kitchen and laundry bills, decoded
- Home improvement costs in 2027: the complete guide
- Dishwasher installation cost, from a simple swap to a first install
- Dryer repair cost by part, labor and service call
- Refrigerator repair cost, symptom by symptom
- Garbage disposal installation cost
- Washer and dryer prices, and where to spend
More related guides: Appliance repair cost, symptom by symptom
Pricing method: prices were researched in November 2026 for 2027 planning and may change. Repair ranges come from HomeGuide, Sears Home Services, Thumbtack, HomeAdvisor and SlashGear; part prices from AppliancePartsPros; new dishwasher prices from a July 2026 Chowhound roundup of Home Depot and Lowe’s listings; tariff details from the June 2025 Section 232 steel derivative expansion. The invoice shown is a hypothetical example. See our disclaimer.
















