Most cabinet budgets go wrong in the showroom, at the moment someone falls for a door style and orders whatever grade comes attached to it. For a typical 10-by-10 kitchen, new cabinets installed run about $4,500 to $15,000 in HomeGuide’s kitchen cabinet cost data, and Fixr puts the national average for a cabinet installation at $7,000. Custom shop work in the same room can pass $24,000. The door is the least of what separates those numbers.
Cabinets are sold in grades, and the grades work like rungs on a ladder: flat-pack, stock, semi-custom and custom. Every step up buys something. The useful question is which rung stops paying you back, given your kitchen, your budget and how long you plan to stay. Below, each rung is priced, followed by the upgrades and side charges that inflate a quote, and the January 2027 tariff date that matters most to buyers of imported boxes.
Short answer for 2027 planning: budget $100 to $300 per linear foot installed for stock cabinets, $150 to $650 for semi-custom and $500 to $1,200 for custom. A 10-by-10 kitchen holds roughly 20 linear feet of cabinets, which works out to about $2,000 to $6,000, $3,000 to $13,000 and $10,000 to $24,000 by our math, before countertops.
Four rungs, priced for a 10-by-10 kitchen
| Rung | What the money buys | Per linear foot, installed | 10-by-10 kitchen, installed |
|---|---|---|---|
| Flat-pack (IKEA) | Frameless boxes in set sizes, wide choice of fronts | $150 to $300 | $3,000 to $6,500 |
| Stock (big-box, RTA) | Set sizes, a short list of finishes, quick delivery | $100 to $300 | $2,000 to $6,000 |
| Semi-custom | Standard boxes with more sizes, depths, finishes and inserts | $150 to $650 | $3,000 to $13,000 |
| Custom | Built to the inch, any species, finish or door style | $500 to $1,200 | $10,000 to $24,000 |
Source: stock, semi-custom and custom per-foot ranges from Fixr’s 2026 cabinet installation cost guide; IKEA figures from HomeGuide. Kitchen totals for the bottom three rows are our arithmetic at 20 linear feet. Countertops are not included.
Notice that the first two rungs overlap. A cheap stock line can undercut IKEA, and a well-equipped IKEA kitchen can cost more than basic stock. The real break in price comes between semi-custom and custom, where the floor jumps to $500 a foot.
Rung 1: Flat-pack, where IKEA sets the floor
HomeGuide’s IKEA cabinet cost guide puts materials for a 10-by-10 kitchen at $2,069 to $4,319 depending on the front, from HAVSTORP and VEDDINGE at the low end to VEDHAMN at the top. Installation labor adds $1,000 to $2,500, for a finished price of $3,000 to $6,500, and IKEA’s own installation service starts at $119 per cabinet.
What you give up is flexibility in the box. Every IKEA kitchen sits on the same frameless carcass in set widths, so a wall that runs a few inches long gets a filler strip rather than a cabinet sized to fit. For a rental, a starter home or a kitchen you expect to redo within a decade, that is an easy trade to make.
Rung 2: Big-box stock, and a $259 base cabinet
At Home Depot, a Hampton Bay Westfield shaker base cabinet, 30 inches wide and sold assembled, is listed at $259 on its product page. That box covers two and a half feet of run, which is why stock cabinets land at $100 to $300 per linear foot once labor and wall cabinets are added. HomeGuide notes that the most basic stock lines start at $60 to $70 per foot installed.
At those prices, the box material is usually where the savings come from. Fixr’s ranges show MDF cabinets at $50 to $250 per linear foot installed and plywood at $100 to $500, so asking what the sides and shelves are made of tells you more about a stock quote than the door color does.
The lower rungs are also the most exposed to trade policy. Imported kitchen cabinets and vanities have carried a 25% Section 232 tariff since fall 2025, and a scheduled jump to 50% was postponed until January 1, 2027, as the National Association of Home Builders reported when the delay was announced. In early November, Reuters, via BNN Bloomberg, reported that the doubling was still set for January 1. No one has published how much of it would reach retail prices, but if you are quoted imported or flat-pack boxes, ask whether the price holds for orders placed before the new year.
Rung 3: Semi-custom, the rung that earns its price
Semi-custom lines start from standard boxes and then let you change depths, finishes, interior fittings and a long list of sizes. Fixr prices them at $150 to $650 per linear foot installed, a spread wide enough to cover both a builder-grade painted shaker and a stained maple kitchen that looks custom from across the room.
For a sense of how an order adds up, HomeLight published a semi-custom quote for a U-shaped kitchen with 13 cabinets: $10,150 in materials (including a $600 trim package), $950 in installation labor, $400 for hardware and a $300 delivery charge, for $11,800 in total. The labor line is small next to the boxes. On this rung, the money goes into the product, which is the part you open and close every day.
For most households, this is where to stop climbing. Semi-custom solves what stock cannot, such as odd wall lengths, deeper uppers and a drawer bank beside the range, without paying a shop to engineer every box. The trap is the options sheet, which can lift a semi-custom kitchen to custom money one checkbox at a time.

Rung 4: Custom shop work at $500 to $1,200 a foot
Custom cabinets are designed and built for one room. Fixr and HomeLight both put them at $500 to $1,200 per linear foot, and HomeLight estimates $10,000 to $24,000 for a 10-by-10 kitchen. In a larger 100 to 200 square foot kitchen, HomeGuide’s custom range climbs to $15,000 to $30,000.
The premium buys exact fit on crooked walls and out-of-square corners, any wood species and finish, inset doors, and a maker who can build a matching piece later. It makes the most sense in an older house with irregular walls, a kitchen you plan to keep for decades, or a design no catalog offers. In a standard-dimension kitchen, semi-custom sizes usually fit well enough that the jump in price buys very little.
Five upgrades that move the price more than the door style
- Inset doors. Doors set flush inside the frame can cost up to twice as much as standard framed cabinets, according to HomeGuide.
- Full-overlay doors. The seamless look adds 20% to 50% in HomeGuide’s estimate.
- Uppers that run to the ceiling. Taller wall cabinets add 10% or more to the cabinet bill.
- Plywood boxes. At $100 to $500 per foot against $50 to $250 for MDF in Fixr’s data, plywood can double the box cost on a budget line.
- Storage inserts. HomeGuide prices a trash and recycling pullout at $200 to $450 installed and a blind-corner organizer at $300 to $1,000. Four or five of these can add a few thousand dollars.
Only the fourth item affects how long the cabinets last. The rest are looks and convenience, which is fine, as long as you choose them on purpose rather than finding them on the final invoice.
The lines that sit outside the boxes
Labor is 30% to 50% of a typical cabinet job, Fixr says, billed at $40 to $100 an hour or $50 to $200 per linear foot. Labor moves less between rungs than the cabinets do, so a custom job’s higher bill is mostly in the boxes and doors.

The side charges are where quotes drift apart:
- Tear-out and disposal: $300 to $600 in HomeGuide’s range, and $350 to $1,000 in Fixr’s. Fixr adds that doing the demolition yourself can save up to $1,000.
- Crown molding: $210 to $570 installed.
- Knobs and pulls: $6 to $60 per piece installed; the hardware alone runs $1 to $30.
- Delivery: the HomeLight quote above carried a $300 trip charge.
- Countertops: a separate purchase on every rung. Our guide to quartz countertop prices covers that bill.
Ask every bidder to price these as separate lines. A quote that rolls them into “installation” is hard to compare and easy to pad.
When new boxes are the wrong buy
If the boxes are sound and the layout works, you may not need the ladder at all. HomeGuide prices refacing at $5,000 to $13,000, refinishing at $1,500 to $4,500 and painting at $2,000 to $6,500; our guide to the cost to paint kitchen cabinets covers that route in detail.
A midrange minor kitchen remodel recouped 112.9% of its cost at resale. A midrange major remodel recouped 50.9%.
Journal of Light Construction, 2025 Cost vs Value Report
That gap matters if a sale is on the horizon. In the 2025 Cost vs Value national averages, the minor remodel cost $28,458 and the major one $82,793, while an upscale major remodel at $164,104 recouped just 35.7%. If you are selling within a few years, sound rung-2 or rung-3 cabinets will do more for your sale price per dollar than a custom kitchen will.
Where to stop climbing
Buy the lowest rung that fits your walls and your timeline. If you are selling within five years, stock or IKEA boxes in good condition are enough, and if your boxes are imported, a price locked in before January 1 keeps the tariff question off your invoice. If you are staying ten years or more, semi-custom with plywood boxes is the best money in the category, and the upgrades worth paying for are the ones you will touch daily. Save custom for a room that truly will not take standard sizes, or for a kitchen you intend to keep for good.
Cabinet questions the showroom may not answer
Is Home Depot or Lowe’s cheaper for kitchen cabinets?
Neither is cheaper across the board. HomeGuide puts installed kitchens at $5,000 to $20,000 or more through Home Depot and $4,000 to $20,000 or more through Lowe’s, against $3,000 to $6,500 for IKEA. Compare quotes for the same grade and box material rather than the store.
How much does it cost to install kitchen cabinets per cabinet?
IKEA’s installation service starts at $119 per cabinet, according to HomeGuide. HomeLight cites handyman rates of $55 to $85 per cabinet. Including the cabinet itself, HomeGuide puts the installed cost at $250 to $600 per box.
How much does it cost to replace just the cabinet doors?
HomeGuide prices door replacement at $2,200 to $6,600 for a kitchen. It works when the boxes are solid and the layout suits you, and it costs less than full refacing.
Do cabinet companies charge to measure the kitchen?
Some do. HomeGuide lists measurement fees of $50 to $150. Ask whether the fee is credited toward the order before you book the visit.
How much do cabinet repairs cost?
HomeGuide puts typical cabinet repairs at $120 to $600. Fixing a sagging door, a broken hinge or a damaged drawer is usually far cheaper than replacing a cabinet run.
Cabinet price sources
- How much do kitchen cabinets cost?, HomeGuide
- How Much Does It Cost to Install Kitchen Cabinets? [2026 Data], Fixr.com (updated January 22, 2026)
- How Much Does It Cost to Install Kitchen Cabinets in 2026?, HomeLight (January 6, 2026)
- How much do IKEA kitchen cabinets cost?, HomeGuide
- Hampton Bay Westfield Feather White Shaker Stock Assembled Base Kitchen Cabinet (30 in. W), The Home Depot (price checked November 2026)
- Trump Delays Higher Tariffs on Furniture, Kitchen Cabinets for One Year, National Association of Home Builders (January 2, 2026)
- U.S. tariffs squeeze Canadian cabinet makers facing doubling of Trump duty, BNN Bloomberg / Reuters (November 5, 2026)
- 2025 Cost vs Value Report: National Averages, Journal of Light Construction
Pricing the rest of the kitchen
- Home improvement costs in 2027: the complete price guide
- What painting kitchen cabinets costs
- Quartz countertop prices and the ways buyers overpay
- Kitchen island costs
- What a new stove costs
- Interior designer fees, hourly vs flat
Pricing method: prices were researched in November 2026 for 2027 planning and may change. Ranges come from the national cost guides, retailer pages and news reports listed above; 10-by-10 totals not credited to a source are our arithmetic at 20 linear feet. Local labor rates and tariffs can move these numbers. See our disclaimer.

















